Washing Machine Error Codes
Your washer flashes a code like 4E, OE, or F8 E1 when it cannot fill, drain, spin, or balance the load. Most of these come down to the simple stuff: both water taps fully open, hoses without kinks, a clean drain filter, a load that is not bunched on one side, and a quick power reset. Cheap checks first, parts later. That order clears a surprising number of codes. Find your brand below, or look up the exact code on the display.
Last updated: October 8, 2026
Bosch washing machine codes
Frigidaire washing machine codes
Kenmore washing machine codes
LG washing machine codes
Maytag washing machine codes
Samsung washing machine codes
Whirlpool washing machine codes
Common washing machine problems
- Will not fill: open both water taps all the way and straighten the inlet hoses. Kinked hoses fool people every week.
- Will not drain: pull the drain pump filter and clean it out, then check the drain hose for clogs or sharp bends.
- UE or UB on the display: the load is off-balance. Redistribute the clothes, check the machine is level, and run the cycle again.
- Code comes back after a reset: write down the exact code and open its guide below. Restarting the same cycle over and over does not fix it.
Safety first
Work through fixes from simplest to most advanced, and stop when a guide tells you to call a technician. Never bypass safety switches, and for gas or high-voltage equipment call a licensed professional.