GE Washing Machine 353 error code
On the GE Profile UltraFast Combo washer/dryer, fault code 353 most often means the lint filter is clogged with fabric softener residue. The filter sits in the drying airflow path, and residue buildup chokes it off: hurting both washing and drying performance.
Last updated: October 8, 2026
What causes the 353 error?
- Fabric softener residue coating the lint filter
- Lint filter not cleaned regularly
How to fix GE 353: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Remove and separate the lint filter
Take out the lint filter and separate the foam filter from the plastic mesh screen. Both parts need cleaning, and you can't reach the residue while they're stacked. - Wash the filter parts
Rinse the foam filter with warm water and scrub the mesh screen with water and a soft-bristled brush to remove softener residue. Let both dry completely before reinstalling. - Reinstall and run a wash & dry cycle
Put the lint filter back in place and run a full wash & dry cycle to confirm the code is gone. If 353 returns, the filter may need a deeper clean.
When to call a technician
- 353 returns right after a thorough filter cleaning
Frequently asked questions
What does error 353 mean on a GE washer dryer combo?
353 on the GE Profile UltraFast Combo usually means the lint filter is clogged with fabric softener residue. Clean the foam filter and mesh screen, then run a wash & dry cycle.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All GE codes →