Bosch Washing Machine E:30/-80 error code
The washer is having trouble draining: the drain pipe or outlet hose may be blocked or kinked, the hose may be connected too high, or the drain pump itself may be blocked.
Also shown as: E:30 / -80, E30-80
Last updated: September 30, 2026
What causes the E:30/-80 error?
- Drain pipe or water outlet hose blocked
- Outlet hose kinked or sharply bent
- Outlet hose connected higher than 39 inches (1 meter)
- Unsuitable hose extension fitted
- Drain pump blocked
- Pump cap not screwed in fully
- Excessive detergent foaming
How to fix Bosch E:30/-80 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Check and clear the hose
Make sure the outlet hose is not kinked or blocked, sits no higher than 39 in. (1 m), and has no unsuitable extension pieces. - Clean the drain pump
Open the pump access flap, remove the pump cap, clear any debris, then screw the cap back in all the way so its handle sits vertical.Safety warning: Unplug the machine and have towels ready; residual water may be hot. - Tame excess foam
If suds are heavy, mix one tablespoon of fabric softener with about 2 cups (0.5 L) of water, pour into compartment II, and reduce detergent on the next wash.
When to call a technician
- Drainage still fails after the hose and pump are clear
- The pump is silent or jammed even after cleaning
- The code returns on every cycle
Frequently asked questions
How high can the Bosch washer drain hose be?
Bosch specifies a maximum of 39 inches (1 meter); higher than that and the pump cannot push water out reliably.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Bosch codes →