Maytag Washing Machine F0E2 error code
The washer detected too many suds — excess foam is keeping the basket from reaching spin speed, or the pressure sensor is reading rising suds. The machine will try a suds-reduction routine on its own.
Also shown as: Oversuds
Last updated: September 30, 2026
What causes the F0E2 error?
- Non-HE detergent used in a high-efficiency washer
- Too much detergent for the load size
- Soft water combined with a full dose of detergent
How to fix Maytag F0E2 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Let the suds routine finish
Give the washer time — it flushes water to dissolve the foam automatically. Don't add more detergent. - Switch to HE detergent and dose correctly
Use only high-efficiency detergent and follow the package dosing for your load size and water hardness. - Run a rinse or clean cycle
If foam remains, run an extra rinse or an empty Clean Washer cycle to flush residue out of the tub.
When to call a technician
- Suds appear even with correct HE detergent dosing
- Code appears on every cycle
- Washer smells musty — residue may need professional cleaning
Frequently asked questions
Can too much detergent damage my washer?
Yes — chronic oversudsing leaves residue that feeds odor and mold, and it can confuse the water-level sensor over time.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Maytag codes →