LG Washing Machine te error code
The temperature sensor (thermistor) or the heating system has a fault. The washer cannot manage water temperature correctly.
Also shown as: te, tE, TE, tE1, tE2, tE3, tE4
Last updated: October 6, 2026
What causes the te error?
- Failed thermistor
- Damaged sensor wiring
- Failed heating element
- Control board fault
How to fix LG te — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset the washer
Unplug the washer for a minute, plug it back in, and try the cycle again. Temporary sensor faults sometimes clear. - Try a cold-water cycle
Run a cold wash as a test. If cold cycles work but hot ones fail, the heater or its sensor is the problem. - Note the exact code
tE1 through tE4 point at different sensors or heaters. Write down the exact code for the technician.
When to call a technician
- tE returns after a power reset
- Water never heats on hot cycles
- You smell burning
- The exact sub-code (tE1-tE4) keeps appearing
Frequently asked questions
Will the washer work at all with tE?
Cold washes may work, but any cycle needing heat will fail or stop.
Is the heater dangerous when faulty?
The washer protects itself by stopping. Do not bypass it; get the sensor or heater replaced.
Can I replace the thermistor myself?
It is an internal part involving wiring and water seals. Most people use a technician.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All LG codes →