Samsung Washing Machine dE error code
The washer doesn't believe the door is closed and locked, so it refuses to start or continue the cycle. Nine times out of ten the door just isn't latched fully, or a sleeve is caught in it. It's a safety lockout, not a broken machine.
Also shown as: dE1, dE2, dC, dC1
Last updated: October 8, 2026
What causes the dE error?
- Door not pushed fully shut, or the latch didn't click
- Laundry caught between the door and the machine body
- Overloaded drum stopping the door from closing
- Dirty or damaged door gasket (front-load models)
- Faulty door lock or switch, or damaged wiring to it
How to fix Samsung dE: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Close the door firmly
Open the door and shut it again firmly until you hear the latch click. Make sure no clothing is trapped between the door and the body, and don't cram the drum past full. - Clean the door gasket (front-load)
Wipe the rubber gasket with a dry cloth to remove lint, hair, or detergent residue. Buildup here can stop the door from sealing or locking properly. - Power cycle the washer
Unplug the washer for 1 to 2 minutes, plug it back in, and press START/PAUSE to retry. This clears false door-sensor states.Safety warning: Always switch off and unplug the washer before inspecting the door mechanism. - Check the latch alignment
Look at the door latch for looseness or damage, and make sure the washer is level so the door lines up the way it should.
When to call a technician
- The code persists after firmly closing the door and power cycling
- The latch is cracked, loose, or visibly damaged
- The door won't lock at all. Likely a failed door lock switch or sensor circuit
- Sparks, burning smell, or any repair involving the lock wiring
Frequently asked questions
Is dE the same as dC?
On most models both are door errors. But on some models dC means an unbalanced load instead. Check your user manual to be sure.
Why does dE appear when I'm not even running a cycle?
If Child Lock is on and there's water sitting in the tub, the code can appear. The washer drains that water if the door isn't closed within 30 seconds.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Samsung codes →