Samsung Washing Machine Sud error code
The washer detected too many suds, usually from too much detergent or non-HE detergent. It pauses to run a foam-removal routine, then carries on normally once the foam clears. Think of it as the washer protecting itself, not breaking down.
Also shown as: Sd, SUdS, SUD, Suds
Last updated: October 8, 2026
What causes the Sud error?
- Too much detergent for the size of the load
- Non-HE detergent used in an HE washer
- Detergent residue built up from previous overdosed loads
- Soft water making a normal detergent dose foam more
How to fix Samsung Sud: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Let the washer finish on its own
Sud is often a protective pause, not a breakdown. The washer runs its foam-removal routine and shows 'End' when it's done, then the cycle proceeds. - Run an extra Rinse/Spin cycle
If suds are still around after the cycle, run a Rinse and Spin with no detergent to flush the leftover foam out of the tub. - Use less, HE-only detergent
Switch to a high-efficiency (HE) detergent and dose for your load size and soil level. Soft water needs even less. This is what stops the code from coming back. - Run an empty cleaning cycle
If suds appear even with no detergent added, run empty cycles until no foam shows up. That clears residue baked into the tub from past overdosing.
When to call a technician
- Sud never clears across multiple cycles even with the right detergent
- Foam pouring out of the door or dispenser with water leaking
- You suspect a faulty suds or pressure sensor after detergent use is corrected
- Burning smell or any electrical concern
Frequently asked questions
Is Sud an error or normal?
Usually normal. It's the washer protecting itself from excess foam. It clears the suds and continues. Start worrying only if it keeps happening with the correct detergent.
Why does Sud appear when I used the normal amount of detergent?
Residue from previous overdosed loads keeps foaming even at correct doses. Run empty cycles until no suds appear, and confirm the detergent is HE-rated.
What does 'End' mean after Sud?
'End' means the foam-removal routine finished and the washer is resuming or finishing the normal cycle.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Samsung codes →