Kenmore Washing Machine F22 error code

The front door lock has failed. The washer detected a problem with the door lock mechanism, often during the cycle, and stopped for safety.

Also shown as: F22, F 22

Last updated: October 6, 2026

Quick answer: Kenmore washing machine error code F22: door lock failed during cycle. The most common cause is failed door lock assembly. Try this first — press Stop and restart. If that does not clear it, inspect the lock area. If the code persists, call a qualified technician.

What causes the F22 error?

  • Failed door lock assembly
  • Loose or damaged wiring to the door lock
  • Door not fully closed or latched
  • Worn lock strike on the washer frame
  • Control board fault

How to fix Kenmore F22 — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Press Stop and restart
    Press the Stop button twice to clear the code. Open the door, close it firmly until you hear the latch click, and start the cycle again.
  2. Inspect the lock area
    With the washer unplugged, look at the door lock and the strike plate for cracks, debris, or misalignment. Wipe the area clean and make sure nothing blocks the latch.
  3. Power-reset the washer
    Unplug the washer for 10 minutes, then plug it back in and press Stop twice. Start a short cycle and watch whether the lock engages normally.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F22 returns right after a reset and a firm door close
  • The lock assembly is cracked, burnt, or the strike is broken
  • The lock makes no sound at all when a cycle starts
  • Wiring or the control board needs testing

Frequently asked questions

Is F22 the same as the dL code?

They are related but separate. dL appears when the door fails to lock at the start of a cycle. F22 is a door lock failure the control detects during the cycle, often pointing to the lock mechanism itself.

Can I still run a cycle with F22 showing?

No. The washer will not run while a door lock fault is active because it cannot guarantee the door stays shut during spin.

How do I know if the lock or the board is bad?

If the lock looks and sounds fine but the code keeps returning after a reset, a technician needs to test the lock circuit and the control board.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Samsung 4E Samsung 5E Samsung UE Samsung LE Samsung dE Samsung 3E Samsung Sud LG OE

All Washing Machine error codes across brands · All Kenmore codes →