Maytag Washing Machine F5E2 error code
The door or lid lock failed — the control tried to lock the door before starting and never got confirmation that the lock engaged. For safety, the cycle won't run until the door is positively locked.
Also shown as: Lock Failure
Last updated: September 30, 2026
What causes the F5E2 error?
- Clothing or an object trapped between the door and the seal
- Door not fully closed
- Worn or broken door lock mechanism
- Wiring fault between the lock and the control
How to fix Maytag F5E2 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Check the door area
Open the door and look for laundry caught in the seal or latch area. Close the door firmly until you hear it latch. - Power-cycle the washer
Unplug the washer for a few minutes to reset the control, then try the cycle again. - Inspect the lock for damage
With the washer unplugged, look at the lock assembly for broken plastic or a latch that won't move freely.Safety warning: Don't force a jammed latch — it can break and trap the door shut.
When to call a technician
- Door won't lock even when fully closed and clear
- Code returns on every cycle
- Lock makes clicking or buzzing sounds but never engages
Frequently asked questions
Can I bypass the door lock?
No — the lock is a safety device that keeps the door shut during high-speed spin. Bypassing it is dangerous and can damage the machine.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Maytag codes →