Frigidaire Washing Machine E13 error code

The water-level pressure system detected a leak in the tub or an air leak in the pressure hose (air bell). The control cannot trust its water-level readings.

Also shown as: E13

Last updated: October 6, 2026

Quick answer: Frigidaire washing machine error code E13: leak in tub or pressure hose. The most common cause is water leaking from a tub hose or seal. Try this first — unplug and look for water. If that does not clear it, inspect the door boot.

What causes the E13 error?

  • Water leaking from a tub hose or seal
  • Loose or cracked hose clamp inside the machine
  • Air bell (pressure chamber) cracked or slipped off its hose
  • Pressure hose pinched, split, or disconnected
  • Excessive foam confusing the pressure sensor
  • Failing water-level pressure sensor

How to fix Frigidaire E13 — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Unplug and look for water
    Unplug the washer. Look underneath and behind it for puddles, drips, or damp spots. Check the fill hoses and drain hose connections for seepage. Any visible water confirms a real leak that needs repair.
    Safety warning: Do not keep running a leaking washer. Water and electricity are a dangerous mix, and leaks damage floors fast.
  2. Inspect the door boot
    Open the washer door and check the door boot (gasket) for tears, trapped socks, or debris. A folded or torn boot leaks during fill. Clear any trapped items and wipe the sealing surface.
  3. Clear excess suds
    Run a hot empty cycle with the correct small dose of HE detergent. If E13 only appeared once after a soapy overload, this can clear residue. If the code returns, the problem is hardware.
  4. Call a technician for internal leak tracing
    Finding a cracked air bell, split pressure hose, or leaking internal seal means opening the machine. A technician can pressure-test the system and replace the failed hose or sensor.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • You find water under or behind the washer
  • E13 returns after clearing suds
  • The pressure hose or air bell is cracked or detached
  • The pressure sensor itself needs testing or replacement

Frequently asked questions

E13 vs E11: what is the difference?

E11 means the tub did not fill in time. E13 means the pressure system detected a leak in the tub or an air leak in the pressure sensing hose. Different faults, different fixes.

Can too much detergent cause E13?

Yes. Too much foam or non-HE detergent can make the pressure sensor read strangely and trigger E13. Always use HE detergent and measure it.

Will unplugging the washer fix E13?

No. Power resets clear the display, but E13 is a physical leak or hose problem. The code will return on the next cycle until the leak is fixed.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Samsung 4E Samsung 5E Samsung UE Samsung LE Samsung dE Samsung 3E Samsung Sud LG OE

All Washing Machine error codes across brands · All Frigidaire codes →