Maytag Washing Machine F3E1 error code

The washer reads its water level through a small pressure hose connected to the tub. That sensor is sending a bad signal, missing or out of range, so the control doesn't know how much water is in there. Without a trustworthy level reading, it can't fill or drain correctly and stops.

Also shown as: Pressure Sensor Fault

Last updated: October 8, 2026

Quick answer: Maytag washing machine error code F3E1: water level sensor fault, signal missing or out of range. The most common cause is the pressure hose is pinched, kinked, or has come loose from the sensor or the tub. Try this first: power-cycle to clear a glitch.

What causes the F3E1 error?

  • The pressure hose is pinched, kinked, or has come loose from the sensor or the tub.
  • The hose is leaking air or clogged with residue inside.
  • The pressure sensor on the control has failed.
  • The control board itself is at fault.

How to fix Maytag F3E1: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power-cycle to clear a glitch
    Unplug the washer for a few minutes, then plug it back in and run a cycle. A one-time sensor glitch sometimes clears with a reset.
  2. Check for siphoning or overfill
    Look at the drain hose. If it's pushed deep into the standpipe, water can siphon out and confuse the level reading. Also check the washer isn't visibly overfilling.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after a reset.
  • The washer overfills or won't fill at all.
  • You suspect the pressure hose or sensor needs testing.

Frequently asked questions

What does the pressure sensor do?

It measures air pressure in a small hose hooked to the tub. As water rises, air pressure in the hose rises too, and the control reads that to estimate the water level. It uses the reading to decide when to stop filling and start washing.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Washing Machine error codes across brands · All Maytag codes →