LG Washing Machine ce error code
The motor drew too much current, a current overload. The washer stops to protect the motor and the electronics.
Also shown as: ce, CE
Last updated: October 6, 2026
What causes the ce error?
- Drum overloaded with laundry
- Unstable incoming power
- Shorted motor windings
- Wiring fault
- Failed control board
How to fix LG ce — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reduce the load
Take out some laundry and redistribute the rest evenly around the drum. An overstuffed drum is the most common trigger. - Power reset the washer
Unplug the washer for 10 seconds, plug it back in, and try a cycle with a normal-size load. - Check the power connection
Make sure the plug is fully seated in the outlet. A loose plug causes voltage drops that look like overloads.
When to call a technician
- CE returns with a normal load
- You smell burning from the washer
- The motor hums but the drum will not turn
- The code follows a power surge
Frequently asked questions
How full is too full?
You should be able to fit your hand loosely above the load. If you have to force the door shut, it is overloaded.
CE appeared with a normal load. Now what?
Then it is likely electrical: unstable power, a motor fault, or a board issue. Do not keep resetting it.
Can a power surge cause CE?
Yes. Surges and brownouts confuse the motor current sensing, so CE often follows electrical disturbances.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All LG codes →