Bosch Washing Machine E17/F17 error code
The machine took too long to fill with water, so it stopped the cycle. The drum may have little or no water in it.
Also shown as: E17, F17, F29
Last updated: September 30, 2026
What causes the E17/F17 error?
- Water tap closed or only partly open
- Inlet filters or AquaStop hose filters blocked
- Water pressure too low
- Inlet hose kinked or damaged
How to fix Bosch E17/F17 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Open the tap fully
Make sure the water tap is turned all the way on and water flows freely. - Clean the inlet filters
Turn the tap off, remove the supply hose, and clean the small filters in the hose connection with a small brush. If you have an AquaStop hose, do not immerse the electric valve end in water.Safety warning: The AquaStop device contains an electric valve; keep it dry. - Check pressure and hose
A fully open tap should deliver roughly 2.5 gallons (10 liters) per minute; if flow is much lower, contact your plumber. Straighten any kinks in the inlet hose.
When to call a technician
- The code returns after the filters are clean and the tap is fully open
- Water pressure at the tap is clearly too low for you to fix
- The machine fills only partway then errors again
Frequently asked questions
How do I check the water pressure for E17?
Fully open the tap into a bucket: Bosch's guidance is about 2.5 gallons (10 liters) per minute. Much less than that points to a plumbing problem.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Bosch codes →