LG Washing Machine PE error code

PE stands for Pressure Sensor Error. The pressure sensor is the part that tells the washer how much water is in the tub, and it's malfunctioning. The washer can't trust its water level reading, so it stops.

Last updated: October 8, 2026

Quick answer: LG washing machine error code PE: water level sensor fault. Service likely needed. The most common cause is the pressure sensor assembly has failed. Try this first: power-reset the washer. If that does not clear it, move the washer out of a humid environment.

What causes the PE error?

  • The pressure sensor assembly has failed.
  • Moisture got into the sensor, which happens when the washer sits in a humid room like a bathroom.
  • A power disruption confused the sensor reading.

How to fix LG PE: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power-reset the washer
    Unplug the power cord and wait 5 minutes before plugging it back in. This can clear PE if moisture or a power blip caused it. Then try a cycle again.
    Safety warning: Don't reset it over and over. If the code returns, stop and call for service.
  2. Move the washer out of a humid environment
    If the washer sits in a bathroom or damp area, move it to a dry, ventilated spot. Moisture on the sensor electronics can trigger PE.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • PE comes back after the 5-minute power reset. This is the most common outcome and means the sensor is faulty.
  • Burning smell, sparks, or major water leaking.
  • Anything that needs the panels opened, the sensor tested, or electrical parts touched.

Frequently asked questions

What does PE mean on an LG washer?

Pressure Sensor Error. The water level sensor is malfunctioning, so the washer stops rather than guess at the fill.

Can I fix PE myself?

Only if it was a temporary glitch. A 5-minute unplug reset sometimes clears it, but a returning PE almost always needs a technician.

Does a humid laundry room cause PE?

Yes. LG notes that moisture from humid rooms like bathrooms can make the sensor fail.

Is PE related to FE?

They're in the same family. Both involve water level detection, but PE is a sensor failure while FE is actual overfilling.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Washing Machine error codes across brands · All LG codes →