Samsung Washing Machine LE error code

The washer found moisture where it shouldn't be, or its water-level sensor is acting up. Sometimes it's a genuine leak. Sometimes it's just excess suds fooling the sensor into crying leak. Either way, don't ignore it until you've ruled out real water.

Also shown as: LC, LC1, 1E, 1C, LE1, E9

Last updated: October 8, 2026

Quick answer: Samsung washing machine error code LE: possible leak or level-sensor fault. The most common cause is a real water leak from a hose, valve, or tub connection. Try this first: look for evidence of a leak. If that does not clear it, run an empty test cycle.

What causes the LE error?

  • A real water leak from a hose, valve, or tub connection
  • Too much detergent, or non-HE detergent, making excess suds
  • Faulty water-level sensor or damaged wiring to it
  • Kinked hoses behind the washer
  • Debris caught in the drain or valve area

How to fix Samsung LE: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Look for evidence of a leak
    Check the floor around and under the washer, then the supply hoses, drain hose, valves, and tub connections behind it. Small leaks hide well, so look carefully. If you find one, stop here and call for service.
    Safety warning: Unplug the washer before reaching behind it if water is pooling anywhere near electrical parts.
  2. Run an empty test cycle
    Run a cycle with no laundry and no detergent or softener. If suds appear, the cause is too much or non-HE detergent. Keep running empty cycles until no suds show up, then see whether the code returns.
  3. Check the hoses
    Make sure the supply and drain hoses behind the washer aren't kinked. Leave the screw and holder that secure the drain hose to the back of the washer alone.
  4. Request service if it persists
    If no suds appear in the empty cycles but the code keeps coming back, the water-level sensor or a hidden leak is the likely cause, and that needs a technician.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • You find any leak at the base, hoses, valves, or tub connections
  • The code continues with no suds after the empty test cycles
  • Sensor, valve, or tub work is needed. All of it means opening the machine
  • Water is leaking heavily or pooling under the washer

Frequently asked questions

I don't see any water, why does LE show?

Excess suds from too much or non-HE detergent can trick the sensor into thinking there's a leak. The empty-cycle test reveals that fast.

Is LE the same as 1E or LC?

On most current Samsung models these codes share the same water-level and leakage meaning. Older regional models split them up a bit, but the checks overlap.

Should I keep using the washer with LE showing?

No. Pause use until you've ruled out a leak. Running it with an active leak risks water damage to your floor and the machine's electronics.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Washing Machine error codes across brands · All Samsung codes →