Dryer Error Codes
Dryer codes usually mean one of three things: the drum will not turn, the dryer will not heat, or a sensor is reporting a fault. Before anything else, clean the lint filter and check the exhaust vent is not crushed or packed with lint. Restricted airflow causes a large share of dryer problems, and lint buildup is the fire risk people underestimate. An electric dryer that runs but stays cold may be on a half-tripped breaker, since electric dryers need the full 240 volts to heat. If a gas dryer smells of gas, do not use it. Turn off the gas supply and call a professional immediately. Find your brand below for code-by-code steps.
Last updated: October 8, 2026
Frigidaire dryer codes
Kenmore dryer codes
LG dryer codes
Maytag dryer codes
Samsung dryer codes
Whirlpool dryer codes
Common dryer problems
- Runs but no heat: check the breaker first (electric dryers need 240V), then the thermal fuse and the vent for blockages.
- Drum will not tumble: usually a snapped belt or a failed motor. Unplug the dryer and call a technician; this is not a reset fix.
- AF or airflow codes: clean the lint screen, then the full length of the exhaust duct. Short ducts clog faster than people expect.
- Gas dryer smells of gas: stop using it at once, turn off the gas supply, ventilate the area, and call a professional.
Safety first
Work through fixes from simplest to most advanced, and stop when a guide tells you to call a technician. Never bypass safety switches, and for gas or high-voltage equipment call a licensed professional.