Frigidaire Dryer EAF error code
The control board's own processor crashed and was restarted by its internal watchdog timer. It is the board reporting that it rebooted itself unexpectedly.
Also shown as: EAF
Last updated: October 6, 2026
What causes the EAF error?
- Power surge or brief power interruption
- Failing electronic control board
- Loose power connection to the control board
- Electrical noise on the house wiring
How to fix Frigidaire EAF — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Unplug the dryer for 10 minutes
Disconnect the dryer from power completely and wait a full 10 minutes. This lets the control board fully discharge and restart cleanly. Plug it back in and start a test cycle. - Check the power cord and outlet
With the breaker off, look at the dryer's power cord and terminal block for loose, burned, or discolored connections. Tighten any loose terminal screws you can safely reach. If anything looks burned, stop and call for service.Safety warning: Switch the breaker off before touching the terminal block. Dryer wiring carries 240 volts. - Watch for a pattern
If EAF appeared once after a storm or outage and never returns, it was a glitch. If it appears regularly, the board itself is failing and the resets will get more frequent. - Call a technician for board replacement
A recurring EAF means the electronic control board needs replacement. The board is plug-and-play for a technician but involves working around line voltage, so it is not a beginner DIY job.
When to call a technician
- EAF returns after a 10-minute power reset
- The code appears repeatedly over days or weeks
- The dryer behaves erratically between EAF occurrences
- You find burned or loose connections at the terminal block
Frequently asked questions
Is EAF serious?
A single occurrence after a power flicker is harmless. Repeated EAF codes mean the control board is failing and should be replaced before it dies mid-cycle.
What does the watchdog timer do?
It is a safety circuit inside the board that restarts the processor if it locks up. EAF is the board's log entry saying the watchdog had to intervene.
Can a surge protector prevent EAF?
A good surge protector reduces the power-spike causes of EAF, but it cannot fix a board that is already failing internally.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dryer error codes across brands · All Frigidaire codes →