Bosch Dryer E08/E09 error code

The dryer found a fault in its electronics. This is a control-level problem the machine cannot fix on its own, and it is not safe to poke at without training.

Also shown as: E08, E09, E24, E25, E28, E90

Last updated: October 8, 2026

Quick answer: Bosch dryer error code E08/E09: internal electronics fault. The most common cause is electronic control fault in the dryer. Try this first: power reset. If that does not clear it, contact Bosch support. If the code persists, call a qualified technician.

What causes the E08/E09 error?

  • Electronic control fault in the dryer
  • Sensor or wiring fault in the electronics
  • Power surge damaging a control component

How to fix Bosch E08/E09: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power reset
    Turn the circuit breaker off for 30 seconds, then back on, to rule out a one-time glitch.
  2. Contact Bosch support
    Bosch's official line is that these faults can only be cleared by an authorized technician, so call Bosch Customer Support at 1-800-944-2904 if the code stays.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code persists after a power reset
  • The dryer behaves erratically, starting, stopping, or beeping on its own
  • Multiple electronics codes appear together

Frequently asked questions

Do electronics faults mean I need a new dryer?

Not necessarily. Many are repairable control issues, but only an authorized technician can tell which part is actually at fault.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dryer error codes across brands · All Bosch codes →