Kenmore Dryer PF error code
The power cut out in the middle of a cycle. That's all PF means: the dryer noticed the electricity stop and then come back. It's usually a quick blip in your house power, a plug that isn't fully seated, or a breaker that tripped. Press Start to pick up where the cycle left off, or press Stop to clear the display.
Last updated: October 8, 2026
What causes the PF error?
- A brief outage or brownout in your house power.
- A dryer plug that's loose in the outlet, or a damaged cord.
- A tripped house breaker on the dryer's circuit.
- Repeated voltage dips from a circuit that's carrying too much load.
How to fix Kenmore PF: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Resume or clear the code
Press Start to pick up the cycle, or press Stop to clear the screen. Before restarting, peek in and check whether the clothes are actually dry. Sometimes the power came back on its own and the load already finished. - Check the power cord and outlet
Push the plug fully into the outlet and look the cord over for damage or discoloration from heat. If the breaker tripped, reset it before restarting the dryer.Safety warning: If the cord or outlet shows burn marks or melting, leave the dryer unplugged and call an electrician before using it again.
When to call a technician
- PF shows up every cycle even though your house power is fine.
- The breaker trips again every time the dryer runs.
- The cord, outlet, or terminal block looks burned or melted.
Frequently asked questions
Will a PF code damage my dryer?
One stray PF won't hurt anything. If it keeps happening, though, the constant interruptions are rough on the electronics, so it's worth finding out why your power keeps dropping.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.