Bosch Dryer E01/E02 error code
The dryer's lint filter is blocked and needs cleaning. A choked filter starves the airflow, so the dryer takes longer, runs hotter, and may shut itself down to protect against overheating.
Also shown as: E01, E02
Last updated: October 8, 2026
What causes the E01/E02 error?
- Lint and fluff built up on the filter
- Filter not cleaned after recent cycles
- Filter coated with residue that chokes airflow
How to fix Bosch E01/E02: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Remove and clean the lint filter
Take the filter out, pull the lint off, and give it a wash under running water for a deeper clean. - Dry the filter fully
Let it dry completely before sliding it back in, so no moisture reaches the electronics. - Clean it after every cycle
Bosch advises cleaning the lint filter after each drying cycle, with an occasional rinse in warm water.
When to call a technician
- The code returns right after a thorough filter clean
- The dryer still overheats or stops mid-cycle
- You smell burning; stop the dryer and call for service
Frequently asked questions
Can a blocked lint filter break my dryer?
Yes. Restricted airflow makes the dryer run hot and work harder, which is why Bosch flags it with an error instead of letting the damage build up.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.