Maytag Dryer AF error code

The dryer is telling you its airflow is choked. A clogged lint screen or exhaust vent, or a vent that's crushed or kinked, is trapping hot moist air inside. The dryer keeps running while this shows, but clothes take forever to dry, and restricted airflow is a genuine fire risk.

Also shown as: F4E3

Last updated: October 8, 2026

Quick answer: Maytag dryer error code AF: restricted airflow, lint screen or vent is clogged. The most common cause is the lint screen is clogged with lint or invisible fabric-softener residue. Try this first: clean the lint screen. If that does not clear it, check the vent behind the dryer.

What causes the AF error?

  • The lint screen is clogged with lint or invisible fabric-softener residue.
  • The exhaust vent is crushed or kinked behind the dryer.
  • Lint has built up along the vent run or in the outside exhaust hood.
  • The vent run is too long or has too many elbows, choking the airflow.

How to fix Maytag AF: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Clean the lint screen
    Pull the lint screen and clear off all the lint. If you use dryer sheets, wash the screen now and then in warm soapy water to dissolve the invisible residue they leave, then dry it completely.
  2. Check the vent behind the dryer
    Unplug the dryer, pull it forward a little, and make sure the vent hose isn't crushed or kinked. It should be rigid or flexible metal duct, never plastic or foil.
    Safety warning: Unplug the dryer before moving it or handling the vent.
  3. Clear the full vent run
    Run the dryer 5 to 10 minutes, then hold your hand under the outside exhaust hood. The airflow should feel like a hair dryer on high. If it's weak, clean lint out of the full vent length and the hood.
  4. Restart on a timed heated cycle
    Touch any key to clear the code, pick a Timed Dry heated cycle, and restart. If the message comes right back, the whole home venting run needs professional cleaning.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the vent is fully cleaned.
  • Airflow at the outside hood stays weak.
  • You smell burning or see scorch marks near the vent.

Frequently asked questions

Can I still use the dryer with the AF code showing?

The dryer will keep running, but poor airflow wastes energy, beats up your clothes, and is a fire risk. Clean the vent before you do more laundry.

How often should I clean the dryer vent?

Clean the lint screen after every load. Have the full vent run cleaned every one to two years, sooner if dry times start getting longer.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dryer error codes across brands · All Maytag codes →