Frigidaire Dryer E63 error code

Part of the heating circuit is touching the metal cabinet, creating a short to ground. Electricity is leaking where it should not.

Also shown as: E63

Last updated: October 6, 2026

Quick answer: Frigidaire dryer error code E63: heater shorted to ground. The most common cause is heating element coil broken and touching the heater housing. Try this first — stop using the dryer. If that does not clear it, power-reset once to rule out a glitch.

What causes the E63 error?

  • Heating element coil broken and touching the heater housing
  • Pinched or chafed heater wiring touching the cabinet
  • Collapsed element insulators letting the coil sag onto metal
  • Burned wiring in the heater circuit

How to fix Frigidaire E63 — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Stop using the dryer
    A heater shorted to ground can overheat unpredictably and poses a shock risk. Unplug the dryer and do not run it again until the heater circuit is repaired.
    Safety warning: Do not keep drying clothes with an E63 code. A ground short can damage the control board or start a fire.
  2. Power-reset once to rule out a glitch
    Unplug the dryer for 10 minutes, then restore power and try a short cycle. A true ground short will bring E63 right back. If it returns, the fault is real.
  3. Call a technician for heater replacement
    Fixing E63 means opening the cabinet, inspecting the heater coils and wiring for contact with the cabinet, and replacing the heater or wiring. The heater circuit carries 240 volts, so this is technician work.
    Safety warning: Never bypass or tape over a grounded heater wire. Replace the failed part.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • E63 returns after a power reset
  • You see sparks, hear buzzing, or smell burning from the dryer
  • The breaker trips when the dryer tries to heat
  • The heater element visibly sags or touches the housing

Frequently asked questions

What is the difference between E63 and E64?

E63 means the heater circuit is shorted to the metal cabinet (ground). E64 means the heater circuit is open, like a cut wire, so no current flows at all.

Can a bad vent cause E63?

Not directly. E63 is an electrical short in the heater itself or its wiring. But chronic overheating from blocked vents can damage the element and lead to a short.

Will the dryer still tumble with E63?

It may tumble, but the control will shut down heating and usually stop the cycle. Do not force it to run.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Bosch E01/E02 Bosch E03 Bosch E06 Bosch E08/E09 Bosch E12 Kenmore AF Kenmore PF Kenmore F:31

All Dryer error codes across brands · All Frigidaire codes →