LG Dryer d95 error code
Flow Sense detected that your exhaust ductwork is about 95% blocked. This is nearly fully blocked. Do not use the dryer until the exhaust system is cleaned.
Also shown as: d95, D95
Last updated: October 6, 2026
What causes the d95 error?
- Severe lint buildup choking the duct
- Crushed flexible vent hose
- Outside vent cap completely blocked
- Very long duct run with many bends
- Lint filter never cleaned
How to fix LG d95 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Do not run the dryer
At 95% blockage the dryer cannot vent heat safely. Leave it off until the duct is cleaned and airflow is verified.Safety warning: Using the dryer with a severely restricted exhaust is dangerous and could result in a fire. - Clean the lint filter
Remove and wash the lint filter with soap and water to clear softener film, then dry it fully. - Clear the outside vent
Check the exterior vent cap for packed lint, nests, or a stuck damper flap. Clear it by hand or with a brush. - Clean the full duct run
Use a vent brush kit from both ends, or hire a professional duct cleaning service for long or hidden duct runs.
When to call a technician
- The code stays on after 5 or more cycles since cleaning
- You cannot reach or see the full duct run
- There is a burning smell
- The outside vent has no airflow at all
Frequently asked questions
Can I use the dryer at all with d95?
No. LG manuals say not to use the dryer until the exhaust system has been cleaned or repaired.
Why did it jump straight to d95?
Lint builds up silently for months. Flow Sense only reports once the restriction crosses its thresholds.
Will the code clear right after cleaning?
Not instantly. Flow Sense needs several consecutive normal cycles to confirm the improvement.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.