Maytag Dryer L2 error code
The dryer found a problem with your home's power supply. The heating element isn't getting the voltage it needs, so the drum keeps turning while the code shows, but there's no heat. This is a house wiring issue, not a broken dryer.
Last updated: October 8, 2026
What causes the L2 error?
- A tripped circuit breaker or a blown household fuse.
- The power cord wasn't installed correctly.
- One of the two 240V legs is missing. Electric dryers run the motor and heater on separate legs.
- A problem with the household wiring or the outlet itself.
How to fix Maytag L2: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Check the breaker or fuses
Electric dryers use two household fuses or breakers. Reset both breakers, or replace any blown fuse with the same size. Never bump up the fuse size to fix a blow.Safety warning: If the breaker trips again immediately, stop and call an electrician. - Confirm the power cord installation
Make sure the power cord is installed per the installation instructions and the plug sits tight in the outlet. A loose plug on a 240V outlet is a fire risk.Safety warning: Never use an extension cord with a dryer. - Restart on a timed heated cycle
Pick a Timed Dry heated cycle and restart the dryer to see whether the code clears now that power is right.
When to call a technician
- The code persists after the breaker and cord check.
- You suspect a household wiring problem.
- The dryer was just installed, have the installation verified.
Frequently asked questions
Why does the drum turn but there's no heat?
On an electric dryer the motor and the heater run on separate power legs. If one leg drops out, the drum still tumbles, but the heater gets no power and you get no heat.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.