Maytag Dishwasher H2O error code
The dishwasher isn't seeing water enter the tub. The fill valve opened but the expected water level never arrived, so the cycle paused to protect the pump from running dry.
Last updated: October 8, 2026
What causes the H2O error?
- The water supply valve to the dishwasher is turned off.
- The water supply hose is kinked.
- The water inlet valve has failed.
- Household water pressure is too low.
How to fix Maytag H2O: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Confirm the water supply is on
Check the shutoff valve under the sink that feeds the dishwasher and make sure it's fully open. Also check the supply hose for kinks where it runs to the unit. - Press Start to resume
Once water is confirmed, press Start. The cycle should pick up where it stopped if water is now reaching the dishwasher.
When to call a technician
- The water supply is fine but the code persists.
- No water enters even with the valve open.
- You suspect the inlet valve needs replacement.
Frequently asked questions
Why did my dishwasher suddenly stop filling?
Most often a shutoff valve that got bumped closed during sink work, or a supply hose that kinked after the dishwasher was pulled out and pushed back in.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Maytag codes →