Bosch Dishwasher E23 error code
E23 means the drain pump has failed or is badly blocked, so wastewater has nowhere to go. This is a pump-level fault, not something a filter cleaning usually fixes.
Last updated: October 8, 2026
What causes the E23 error?
- Debris jamming the drain pump
- Failed drain pump motor
- Electrical or control fault in the pump circuit
How to fix Bosch E23: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset
Switch the circuit breaker off for 30 seconds, then back on. If the code was a one-time glitch, it clears here. - Call Bosch support
Bosch's official guidance for E23 is to call Bosch Customer Support at 1-800-944-2904. The pump may need replacement, and that is a service job.
When to call a technician
- E23 shows at all; Bosch treats it as a service-level fault
- The pump struggles, runs dry, or makes odd noises
- Water stays in the tub after a cycle
Frequently asked questions
Can I fix a Bosch E23 myself?
Bosch does not publish a DIY fix for E23. Try the power reset once, then call customer support. The pump is most likely blocked, clogged, or failed.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Bosch codes →