Bosch Dishwasher E25 error code

E25 points at the drain pump itself: it is blocked, or its cover is loose or missing. Standing water in the tub floor is the usual giveaway, often noticed right when you open the door.

Also shown as: E-25

Last updated: October 8, 2026

Quick answer: Bosch dishwasher error code E25: drain pump blocked or cover loose. The most common cause is food, seeds, glass, or other debris jamming the pump. Try this first: take out the filter. If that does not clear it, clean around the pump and refit the cover.

What causes the E25 error?

  • Food, seeds, glass, or other debris jamming the pump
  • Pump cover loose, knocked aside, or missing
  • Drain hose kinked or sharply bent
  • Clogged air gap or drain hose

How to fix Bosch E25: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Take out the filter
    Lift the filter assembly out of the tub floor. The drain pump cover sits directly underneath it.
  2. Clean around the pump and refit the cover
    Remove the pump cover, clear standing water and debris from around the impeller, then press the cover back down until it clicks shut.
    Safety warning: Watch for broken glass and other sharp bits. Protect your hands.
  3. Check the hose and air gap
    Straighten any kinks in the drain hose, clear the air gap, and if you suspect the hose itself, disconnect it and flush it into a bucket.
  4. Run a test cycle
    Start a rinse cycle and make sure the tub drains fully and the code stays gone.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The pump impeller will not turn freely even after cleaning
  • E25 comes right back after a full clean
  • Water still stands in the tub after a cycle

Frequently asked questions

What is the difference between Bosch E24 and E25?

E24 is a general drain fault, while E25 points specifically at the drain pump being blocked or its cover being loose or missing. They live in the same neighborhood.

How do I get to the drain pump on a Bosch dishwasher?

Remove the filter at the bottom of the tub. The pump cover is directly underneath.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All Bosch codes →