Bosch Dishwasher E24 error code

E24 means the dishwasher cannot pump dirty water out in time. You will often find water sitting in the bottom of the tub, or a cycle that quits halfway through, sometimes with gurgling or humming during the drain.

Also shown as: E-24

Last updated: October 8, 2026

Quick answer: Bosch dishwasher error code E24: dishwasher not draining properly. The most common cause is food, glass, or debris stuck in the drain pump. Try this first: clean the drain filter. If that does not clear it, clear the drain pump.

What causes the E24 error?

  • Food, glass, or debris stuck in the drain pump
  • Drain pump cover loose or not fitted
  • Drain hose kinked, bent, or clogged
  • Air gap or garbage-disposal connection blocked; on new installs the disposal knockout plug may still be in

How to fix Bosch E24: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Clean the drain filter
    Pull the filter assembly out of the tub floor and scrub it under running water with mild soap and a soft brush. Most E24 faults start here.
  2. Clear the drain pump
    Lift the filter out to expose the pump cover, remove it, and scoop out standing water and any debris around the pump. Press the cover back down until it clicks firmly.
    Safety warning: Pump debris can be sharp, broken glass included. Protect your hands.
  3. Straighten the hose and check the air gap
    Unkink the drain hose, clear the air gap of debris, and on a new garbage disposal make sure the dishwasher knockout plug was removed.
  4. Reset and run a test
    Reset the dishwasher using the steps in your owner's manual, then run a short rinse cycle and check that the tub empties fully.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • Water still pools in the tub after the filter, pump, and hose are all clean
  • The drain pump grinds or makes loud noises
  • E24 keeps coming back every cycle

Frequently asked questions

How do I reset a Bosch dishwasher after E24?

Clear any blockage first, then reset with the steps in your owner's manual and run a rinse cycle. If the water drains fully, you are good.

Where is the drain pump on a Bosch dishwasher?

It is under the filter at the bottom of the tub. Lift the filter out and you will see the pump cover sitting right beneath it.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All Bosch codes →