Bosch Dishwasher E14 error code

E14 means the flow meter, the sensor that measures water coming into the dishwasher, has failed or the filling system is not delivering water correctly. The machine cannot meter its fill, so it stops.

Last updated: October 8, 2026

Quick answer: Bosch dishwasher error code E14: flow meter or fill fault. The most common cause is failed flow meter sensor. Try this first: power reset. If that does not clear it, call Bosch support. If the code persists, call a qualified technician.

What causes the E14 error?

  • Failed flow meter sensor
  • Water supply problem reaching the dishwasher
  • Internal filling-system fault

How to fix Bosch E14: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power reset
    Turn the circuit breaker off for 30 seconds, then back on, and see if the code clears.
  2. Call Bosch support
    Bosch's official guidance for E14 is to call Bosch Customer Support at 1-800-944-2904. The flow meter is a service-level part.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • E14 appears at all; this is a sensor-level fault
  • The dishwasher fills very slowly or not at all

Frequently asked questions

What does a flow meter do in a dishwasher?

It measures the water entering the machine so the controller fills the tub to the right level. When it fails, the machine shows E14 and needs service.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All Bosch codes →