Bosch Dishwasher E09 error code
E09 means the heater built into the heat pump has a fault, so the dishwasher cannot heat water properly. You will notice dishes finishing cold or damp, and drying gets noticeably worse.
Also shown as: F09
Last updated: October 8, 2026
What causes the E09 error?
- Internal heater circuit fault in the heat pump
- Control board issue affecting the heater circuit
How to fix Bosch E09: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset
Flip the circuit breaker off for 30 seconds, then back on, and see if the code clears.Safety warning: Use dry hands at the breaker panel. - Contact Bosch support
If E09 comes back, call Bosch Customer Support at 1-800-944-2904. Heater work involves high-voltage parts, so it belongs to a technician.
When to call a technician
- E09 reappears after the power reset
- Dishes are cold or wet at the end of cycles
- You smell burning or the breaker trips; switch the machine off and call support right away
Frequently asked questions
Will my Bosch dishwasher still wash with E09?
It might run, but without proper heat the cleaning and drying both suffer. Call for service instead of running cycle after cycle and hoping.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Bosch codes →