Maytag Dishwasher F9E1 error code

The dishwasher isn't draining fast enough. Water is still sitting in the tub at the end of the cycle, and the control flagged a long drain. It's almost always a blockage somewhere in the drain path, not a dead pump.

Also shown as: Long Drain

Last updated: October 8, 2026

Quick answer: Maytag dishwasher error code F9E1: not draining, blockage in the drain path. The most common cause is the dishwasher filter is clogged with food. Try this first: clean the filter. If that does not clear it, check the drain hose.

What causes the F9E1 error?

  • The dishwasher filter is clogged with food.
  • The drain hose is kinked, pinched, or clogged.
  • The garbage disposer knockout plug is still in place on a new install.
  • The air gap or the disposer itself is clogged.

How to fix Maytag F9E1: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Clean the filter
    Pull the filter out of the tub floor and wash it thoroughly under running water. Trapped food in there is the most common cause of this code.
  2. Check the drain hose
    Follow the hose from the dishwasher to the sink and straighten out any kinks. Feel for pinches or soft clogged spots along its length.
  3. Clear the disposer and air gap
    If the dishwasher drains through a garbage disposer, run the disposer to clear it, and on new installs confirm the knockout plug was removed. If you have an air gap, pop its cap off and clear any blockage.
  4. Power-cycle and retry
    Disconnect power for 30 seconds to reset the control, then run a drain or short cycle and see if the tub empties.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • Water still won't drain after cleaning the filter and hose.
  • The drain pump hums but doesn't move water.
  • The code returns immediately on every cycle.

Frequently asked questions

Where is the dishwasher filter?

On most Maytag models it's a twist-out assembly on the floor of the tub, under the lower rack. Your owner's manual shows the exact spot for your model.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All Maytag codes →