Maytag Dishwasher F7E2 error code

The control found a fault with the wash motor, the pump that sprays water through the wash arms. If that motor can't run, the dishwasher can't clean dishes, so it stops the cycle.

Last updated: October 8, 2026

Quick answer: Maytag dishwasher error code F7E2: wash motor fault, spray pump not working. The most common cause is the wash motor has failed. Try this first: power-cycle the dishwasher. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F7E2 error?

  • The wash motor has failed.
  • A wiring fault to the motor.
  • A control board fault.
  • Debris jamming the pump.

How to fix Maytag F7E2: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power-cycle the dishwasher
    Disconnect power for 30 seconds, either unplug it or flip the breaker, then restore power and try a cycle. A glitch sometimes clears, but a real motor fault will come right back.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the power cycle.
  • The dishwasher fills but never sprays.
  • You hear no motor sound during the wash phase.

Frequently asked questions

Is F7E2 a DIY fix?

Past a power reset, usually not. The wash motor is an internal component that needs a technician to test and replace.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All Maytag codes →