LG Dishwasher ne error code
The vario (diverter) motor has a problem. It switches water flow between the spray arms, and without its position feedback the dishes wash unevenly.
Also shown as: ne, nE, NE, vario motor error
Last updated: October 6, 2026
What causes the ne error?
- Failed diverter (vario) motor
- Faulty diverter microswitch
- Loose wiring or connector
- Water damage to the motor
- Temporary control glitch
How to fix LG ne — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset for 10 to 15 minutes
Unplug the dishwasher or switch off the breaker for 10 to 15 minutes. Temporary diverter faults sometimes clear with a longer reset. - Check the spray arms
Spin each spray arm by hand to make sure they move freely and are not clogged with food. - Notice the cleaning pattern
If dishes on one rack come out dirty while the other rack is clean, the diverter is stuck sending water to only one arm. Tell the technician which rack is affected.
When to call a technician
- nE returns after a long reset
- One rack of dishes stays dirty
- The diverter motor needs replacing
- Water leaked onto the motor area
Frequently asked questions
Will the dishwasher still run with nE?
Often yes, it finishes the cycle. The main symptom is poorly washed dishes, especially on one rack.
What is the vario motor?
A small motor that turns a valve to send water to the lower, middle, and upper spray arms in turn.
Can I replace the diverter motor myself?
It sits under the tub and involves wiring and seals. Most people leave it to a technician.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.