LG Dishwasher le error code
The wash (circulation) motor is locked or stalled. It cannot turn, so the dishwasher stops the cycle.
Also shown as: le, LE
Last updated: October 6, 2026
What causes the le error?
- Debris jamming the pump impeller
- Failed wash motor
- Wiring fault to the motor
- Control glitch after a power blip
- Seized motor bearings
How to fix LG le — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset the dishwasher
Turn the breaker off for 10 seconds, then back on. A motor lock from a power blip often clears with a reset. - Check the spray arms and filter
Remove the lower rack, take out the filter, and clear food debris. Spin the spray arms to confirm nothing blocks them. - Start a fresh cycle
Run a short cycle with no dishes. If it runs normally, the jam has cleared.
When to call a technician
- LE returns after a reset
- The motor hums loudly then stops
- You cannot clear debris from the pump area
- The code appears on every cycle
Frequently asked questions
Is LE the same as CE?
They are cousins. LE means the motor is locked or stalled mechanically, while CE means it drew too much current.
What usually jams the motor?
Glass shards, bones, fruit pits, and labels that slip past the filter into the pump area.
Can I unjam the pump myself?
You can clear the filter and sump area. Anything deeper inside the pump needs a technician.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.