LG Dishwasher ce error code
The wash motor drew too much current, an electrical overload. The dishwasher stops to protect the motor and the control board.
Also shown as: ce, CE
Last updated: October 6, 2026
What causes the ce error?
- Debris jamming the wash motor or impeller
- Failing wash motor
- Short in the motor wiring
- Control board fault
- Power surge
How to fix LG ce — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset the dishwasher
Turn the dishwasher off at the breaker for 10 seconds, then turn it back on. This clears overload trips caused by power blips. - Check the spray arms
Spin the spray arms by hand. They should turn freely. Remove any food, labels, or debris wrapped around them or the filter below. - Run an empty test cycle
Start a short cycle with no dishes. If it completes, the overload may have been a one-time jam.
When to call a technician
- CE returns right after a reset
- You smell burning from the dishwasher
- The motor hums but never turns
- The code follows a power surge or outage
Frequently asked questions
Is CE the same as LE?
They are related. Both point at the wash motor, but CE specifically means the motor drew too much electrical current.
Can a power surge cause CE?
Yes. A surge can trip the current protection even when the motor is fine, which is why a reset is the first step.
Should I keep resetting CE?
Reset once. If it returns, the motor or wiring has a real fault and needs a technician.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.