Kenmore Dishwasher F8E1 error code
The control sees the dishwasher draining too slowly. Water isn't leaving the tub fast enough, so you're left with standing water at the end of the cycle and dishes that never get properly clean.
Also shown as: 8-1, F8 E1
Last updated: October 8, 2026
What causes the F8E1 error?
- A drain hose that's clogged or kinked.
- A blocked garbage disposal or air gap.
- A failing drain pump.
- Food debris clogging the sump filter.
How to fix Kenmore F8E1: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Check the drain path
Shut off power and water, then check the drain hose for kinks or clogs. If it ties into a garbage disposal, run the disposal and make sure the knockout plug was removed when it was installed. - Clean the filter and sump
Pull out the lower rack and lift out the sump filter assembly. Dig out the food debris and rinse the filter clean. - Test the drain pump
If the drain path is clear, check the drain pump wiring. If the wiring is intact but the pump won't run, the pump needs replacing.Safety warning: Keep the breaker off while you're working under the dishwasher.
When to call a technician
- The drain pump runs but water still won't leave.
- You hear the pump humming but nothing moves.
- Standing water comes back every cycle.
Frequently asked questions
Can a garbage disposal cause F8E1?
Yes, it's one of the most common causes. If the disposal's knockout plug was never removed, or the disposal is jammed full, the dishwasher can't push water through it.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Kenmore codes →