Kenmore Dishwasher F2E2 error code

The user interface control (the touchpad panel) cannot communicate with the electronic control board. The dishwasher cannot take your commands, so it stops.

Also shown as: F2E2, F2 E2, 2-2

Last updated: October 6, 2026

Quick answer: Kenmore dishwasher error code F2E2: panel can't talk to board. The most common cause is loose or corroded ribbon cable between the touchpad and the control board. Try this first — power-reset the dishwasher. If that does not clear it, check for stuck or wet buttons.

What causes the F2E2 error?

  • Loose or corroded ribbon cable between the touchpad and the control board
  • Moisture damage on the touchpad
  • Failed user interface control board
  • Failed main electronic control board

How to fix Kenmore F2E2 — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power-reset the dishwasher
    Flip the dishwasher breaker off for 5 minutes, then turn it back on. Try the touchpad. If buttons respond normally, it was a glitch.
  2. Check for stuck or wet buttons
    Press each button on the touchpad to feel for one that sticks. Wipe the panel dry. Moisture under the panel can block communication.
  3. Reseat the ribbon cable
    Turn the breaker off and open the door panel to reach the ribbon cable between the touchpad and the control board. Unplug it, check for corrosion, and plug it back in firmly. Restore power and test.
    Safety warning: Turn off the breaker before opening the door panel or touching the ribbon cable.
Related guide: Dishwasher troubleshooting — fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F2E2 returns with a clean, firmly seated ribbon cable
  • The ribbon cable or its contacts are corroded
  • The user interface panel needs replacement
  • The main control board needs replacement

Frequently asked questions

What does F2E2 mean on a Kenmore dishwasher?

It means the touchpad panel lost communication with the main control board. Check the ribbon cable between them first.

Do I replace the touchpad or the main board?

The touchpad (user interface) is the usual suspect. If a new touchpad does not fix it, the main control board is next.

Can moisture cause F2E2?

Yes. Steam or a leak reaching the touchpad can corrode the ribbon cable contacts and break communication.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Bosch E15 Bosch E24 Bosch E25 Bosch E22 Bosch E23 Bosch E09 Bosch E12 Bosch E14

All Dishwasher error codes across brands · All Kenmore codes →