GE Dishwasher C2 error code

C2 appears when the total pump-out cycle stretched past seven minutes. It's the same story as C1, but the longer window points to a more stubborn restriction in the drain path. The control usually keeps beeping while this code is up.

Last updated: October 8, 2026

Quick answer: GE dishwasher error code C2: drain cycle exceeded seven minutes: drainage is restricted. The most common cause is air gap or drain hose that's severely blocked. Try this first: press RESET to stop the beeping. If that does not clear it, clear the drain path.

What causes the C2 error?

  • Air gap or drain hose that's severely blocked
  • Garbage disposer packed with food waste
  • Drain pump fighting a hard restriction

How to fix GE C2: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Press RESET to stop the beeping
    Press the RESET pad on the control panel to stop the beeping and cancel the current state. This quiets the machine but doesn't fix the underlying drainage problem.
  2. Clear the drain path
    Clean the air gap, straighten the drain hose and check it for kinks or blockages, and run the garbage disposer to clear food waste. These are the same steps you'd take for a C1 drain issue.
    Safety warning: Turn off power at the circuit breaker before working under the sink.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • C2 comes back after the drain path is fully clear

Frequently asked questions

How do I stop the beeping on a GE dishwasher C2 code?

Press the RESET pad to stop the beep. Then work through the drain checks (air gap, hose, disposer) to fix the underlying drainage problem.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All GE codes →