GE Dishwasher C1 error code

C1 shows up when the dishwasher's drain pump ran for more than two minutes during pump-out. That's the control's way of saying it's struggling to push water out of the tub. In almost every case this points to a blockage somewhere in the drain path rather than a failed part.

Last updated: October 8, 2026

Quick answer: GE dishwasher error code C1: drain pump ran too long: something is blocking the drain. The most common cause is clogged air gap on the sink deck. Try this first: clean the air gap. If that does not clear it, check and reposition the drain hose.

What causes the C1 error?

  • Clogged air gap on the sink deck
  • Drain hose that's kinked, routed too high, or pushed too far down
  • Garbage disposer clogged with food waste

How to fix GE C1: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Clean the air gap
    Pull off the air gap cap (usually mounted on the sink deck or countertop) and clear out any debris or buildup inside it, then put the cap back on. Gunk collects here fast, so this is the first place to look.
  2. Check and reposition the drain hose
    Make sure the drain hose isn't kinked, pinched, or shoved too far down the standpipe, and reposition it so it forms a proper high loop. If the hose is cracked or split, replace it rather than patching it.
    Safety warning: Turn off power at the circuit breaker before reaching under the sink to handle the hose.
  3. Run the garbage disposer
    Run the disposer briefly with water flowing to clear food waste that can block the dishwasher's drain into the disposer. A full or jammed disposer backs up straight into the dishwasher drain.
Related guide: Dishwasher troubleshooting: fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The C1 code returns after you've cleared the air gap, hose, and disposer

Frequently asked questions

What does C1 mean on a GE dishwasher?

C1 means the drain pump-out took longer than two minutes. That signals the machine is having trouble draining water from the tub.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Dishwasher error codes across brands · All GE codes →