Frigidaire Dishwasher I60 error code
The dishwasher is not satisfied with water heating. The water is not reaching the required temperature, or the heater circuit is reporting a fault.
Also shown as: I60
Last updated: October 6, 2026
What causes the I60 error?
- Failed or weak heating element
- Faulty water temperature sensor (thermistor)
- Wiring fault in the heater circuit
- Tripped safety thermostat
- Too little water circulating past the heater
- Failing control board
How to fix Frigidaire I60 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Run the hot tap first
Before starting the dishwasher, run the kitchen hot tap until the water is fully hot. This gives the dishwasher a head start and rules out cold supply water as the cause. - Clean the filters
Pull out the bottom rack and remove the filter assembly. Rinse the filters clean. Clogged filters reduce water circulation, and poor circulation can overheat or underperform the heater. - Power-reset at the breaker
Turn off the dishwasher's circuit breaker for 5 minutes, then turn it back on and run a normal cycle. This clears a false heating fault from a glitch. - Call a technician for heater testing
If I60 returns, the heating element, temperature sensor, or heater wiring needs professional testing. Element replacement is a common and straightforward technician repair.
When to call a technician
- I60 returns after cleaning filters and a power reset
- Dishes come out cold and poorly cleaned
- The heating element or thermistor needs replacement
- The heater wiring or control board is faulty
Frequently asked questions
What are the symptoms of I60 besides the code?
You will notice dishes that are not fully clean or dry, and the cycle may run much longer than usual as the dishwasher waits for temperature it never reaches.
Can cold incoming water cause I60?
Yes. If the incoming water is cold, the dishwasher works harder to heat it. Running the kitchen tap hot before starting helps the dishwasher reach temperature.
Can I test the heating element myself?
The heater runs on line voltage inside a water-filled tub. Testing it means working around both. Leave it to a technician.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Frigidaire codes →