Frigidaire Dishwasher ER error code

General error indicator. The number shown with ER (ER:01 through ER:05) identifies the specific fault the dishwasher detected.

Also shown as: ER

Last updated: October 6, 2026

Quick answer: Frigidaire dishwasher error code ER: general fault, check number. The most common cause is a stored fault the control wants you to identify by its number. Try this first — read the full code number. If that does not clear it, power-reset at the breaker.

What causes the ER error?

  • A stored fault the control wants you to identify by its number
  • ER:01: control board or sensor fault
  • ER:02: drain pump or drain hose blockage
  • ER:03: wash motor fault
  • ER:04: heating element fault
  • ER:05: keypad communication fault

How to fix Frigidaire ER — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Read the full code number
    Look closely at the display and write down the complete code, including the number after ER. Each number points to a different part: control board, drain, motor, heater, or keypad.
  2. Power-reset at the breaker
    Turn off the dishwasher's circuit breaker for 5 minutes, then turn it back on. This clears glitch codes. Run a short cycle and see if the ER code returns.
  3. Follow the specific code's steps
    Once you know the number, look up the matching code: ER1 (control board), ER:02 (drain), ER:03 (motor), ER:04 (heater), ER:05 (keypad communication). Each has its own checks.
Related guide: Dishwasher troubleshooting — fix common problems, with links to every dishwasher error code we cover.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The ER code returns after a power reset
  • The display shows ER but the number is unreadable
  • Multiple ER codes appear together
  • You need the specific fault diagnosed professionally

Frequently asked questions

What does a bare ER mean?

ER is the general error indicator on Frigidaire dishwashers. The number shown with it (ER:01 through ER:05) names the specific fault.

My display shows ER with a number. What should I note?

Write down the full code exactly as shown, including the number. That number is what your technician (or the specific FixCode page) needs.

Will ER clear with a reset?

A power reset clears glitch codes. If the ER code returns on the next cycle, the underlying fault is real and needs diagnosis.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Bosch E15 Bosch E24 Bosch E25 Bosch E22 Bosch E23 Bosch E09 Bosch E12 Bosch E14

All Dishwasher error codes across brands · All Frigidaire codes →