Samsung Oven SE error code
The control thinks a key on the touchpad is stuck or shorted - it is registering a press that is not happening. The oven usually beeps and locks out the panel.
Also shown as: SE, -SE-, 5E
Last updated: October 6, 2026
What causes the SE error?
- A touch key physically stuck or shorted
- Moisture on the control panel
- Grease or residue under the touch keys
- Ribbon cable fault between keypad and board
- Failed touchpad or main control board
How to fix Samsung SE — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Press Clear/Off and press each key
Clear the code, then press every key on the panel firmly one by one. This frees a mechanically stuck key and is the first step for SE. - Clean the panel with a dry cloth
Wipe the touchpad with a soft, dry cloth. Moisture and cooking grease on the panel are leading causes of false key presses - do not spray cleaner directly on it.Safety warning: Keep liquids out of the panel edges; moisture under the keys causes SE. - Disconnect power for 30 seconds
Flip the oven's breaker off for at least 30 seconds and back on. If SE returns with a clean, dry panel, the keypad or board is faulty.
When to call a technician
- SE returns with a clean, dry panel
- A key is visibly damaged or unresponsive
- The touchpad ribbon cable needs inspection
- The touchpad or control board needs replacement
Frequently asked questions
The oven beeps constantly with SE. How do I stop it?
Press Clear/Off to silence it. If beeping resumes, flip the breaker off until you can get service - constant beeping means the key fault is still active.
Can steam from cooking cause SE?
Yes. Steam condensing on the touchpad registers as key presses. Ventilate the kitchen and wipe the panel dry.
Is SE the same as the 5E drain code on washers?
No - same letters, different appliance. On Samsung ovens and microwaves, SE is a keypad/touchpad fault, not a drain issue.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.