Frigidaire Oven F1 error code
The range thinks a touch-panel button is stuck or registering presses on its own. The control cuts oven activity so the oven cannot heat when nobody asked it to.
Last updated: October 8, 2026
What causes the F1 error?
- A stuck or shorted keypad key
- Moisture or debris under the keys
- A failed keypad membrane
- A control board fault
How to fix Frigidaire F1: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reset the range
Cut power for up to 30 seconds, unplug it or flip the breaker off and on, then check whether the code clears. A returning code means the keypad fault is real and not a glitch. - Check the keypad
Press each key and feel for one that sticks down. Wipe the panel clean and dry; spills and grime under the keys cause phantom presses.
When to call a technician
- The code returns after the reset
- A key is physically stuck or the panel is dead
- The oven is acting erratically
Frequently asked questions
Will the oven still work with F1?
Not safely. The control locks oven functions until the keypad fault clears. Reset first; if the code returns, book service before using the oven.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.