Bosch Oven E9000/E9010 error code
The range detected that the household supply voltage is outside its normal range, either too high or too low. Wrong voltage can damage the electronics, so the appliance flags it rather than risking it.
Also shown as: E9000, E9010
Last updated: October 8, 2026
What causes the E9000/E9010 error?
- Household voltage too high or too low
- Electrical utility supply fluctuation
- Wiring issue in the home circuit
How to fix Bosch E9000/E9010: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Contact your utility or an electrician
Bosch's official guidance is to contact your electrical utility provider or Bosch Customer Support at 1-800-944-2904. This is a power-supply problem, not an appliance setting.Safety warning: Do not touch home wiring yourself. Use a licensed electrician.
When to call a technician
- The code shows up at all; this points at the supply
- Other appliances are also acting strangely, which points to the home supply
Frequently asked questions
Can I fix E9000 by resetting the oven?
A reset will not change your home's voltage, so the code will keep returning until the utility or an electrician resolves the supply issue.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.