Bosch Oven E011 error code
The touch sensor on the oven's control panel is failing, so buttons may not respond or the panel may act on its own. Grease, moisture, or condensation on the panel is a common trigger.
Also shown as: e011
Last updated: September 30, 2026
What causes the E011 error?
- Condensation or moisture on the keypad
- Grease or residue interfering with touch sensing
- Control panel electronics fault
How to fix Bosch E011 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Clean the control panel
Wipe the panel with a dry cloth to remove moisture, grease, or condensation. - Power-cycle the range
Turn the appliance off at the circuit breaker, wait five minutes, then turn it back on.Safety warning: Use the breaker, not the oven controls; work with dry hands. - Call Bosch support
If the problem persists, contact Bosch Customer Support at 1-800-944-2904 to book a service visit.
When to call a technician
- Touch keys stay unresponsive after cleaning and a reset
- The panel registers touches on its own
- The code reappears quickly
Frequently asked questions
Why do oven touch panels fail after steam or spills?
Moisture and grease confuse capacitive touch sensors; a dry clean plus a power reset resolves many cases, otherwise it is an electronics fault.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.