Maytag Oven F6E1 error code

The wall oven found a problem with its appliance manager control, the converter control, or the wiring between them. This is an internal electronics fault, nothing to do with how you were cooking.

Last updated: October 8, 2026

Quick answer: Maytag oven error code F6E1: wall oven control board fault, reset power. The most common cause is an appliance manager control fault. Try this first: reset power at the breaker. If that does not clear it, verify oven operation. If the code persists, call a qualified technician.

What causes the F6E1 error?

  • An appliance manager control fault.
  • A converter control fault.
  • A wiring fault between the control boards.

How to fix Maytag F6E1: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Turn off the circuit breaker for one full minute, then restore power and watch the display. A clean reboot is the first thing to try.
  2. Verify oven operation
    Check that the code stays away and the oven heats and responds normally.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code comes back after reset.
  • The oven display is frozen or blank.
  • Any sign of electrical damage.

Frequently asked questions

Is F6E1 on an oven the same as F6E1 on a dishwasher?

No. Maytag reuses the F6E1 pattern across appliances, but on a wall oven it points to the appliance manager and converter controls, a different system from the dishwasher's user-interface fault.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All Maytag codes →