Maytag Oven F5-E1 error code
F5-E1 means the oven door latch system has failed. The latch motor or its switches cannot confirm the door locked or unlocked — common after a self-clean cycle.
Also shown as: F5-E1, F5 E1, F5E1, F5-E0
Last updated: October 6, 2026
What causes the F5-E1 error?
- Failed door latch motor (common after self-clean heat)
- Failed latch position switches
- Door stuck locked after a self-clean cycle
- Damaged wiring to the latch assembly
- Mechanical jam in the latch mechanism
- Control board not driving the latch motor
How to fix Maytag F5-E1 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Let the oven cool completely
If the code appeared during or after self-clean, turn the oven off and let it cool for several hours. Heat expansion can jam the latch, and it may release on its own when cool.Safety warning: Never force the door open while the oven is hot or the latch is engaged. - Power reset for one minute
Turn the breaker off for one minute, then on. The control will retry the latch on power-up. Listen for the latch motor running. - Try Cancel, then a short Bake
Press Cancel, then start a brief Bake cycle and cancel it. The lock/unlock sequence this triggers can free a latch that is stuck between positions.Safety warning: If the door is locked shut, do not try to pry it. - Check for obstructions
With the breaker off and the oven cool, look at the latch hook area at the top of the door frame for food debris or a bent part blocking movement.Safety warning: Keep the breaker off while inspecting the latch area.
When to call a technician
- The door stays locked after cooling
- The latch motor makes no sound on reset
- The latch assembly needs replacement
- The range is under warranty
Frequently asked questions
My oven door is locked shut with F5-E1. How do I open it?
Let it cool fully first — most latches release when cool. If it stays locked, a technician can release it manually. Forcing it can break the latch and the door.
Why does this happen after self-clean?
Self-clean runs the oven extremely hot. The heat stresses the latch motor and switches, which is when they most often fail.
Can I still use the cooktop?
Usually yes. The fault is in the oven door latch system, which does not affect the cooktop.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.