Maytag Oven F2-E0 error code
F2-E0 means the oven detected a shorted key on the touchpad. The control thinks a button is being pressed continuously, so it locks out and often beeps.
Also shown as: F2-E0, F2 E0, F2E0
Last updated: October 6, 2026
What causes the F2-E0 error?
- A key physically stuck by dried spills or grease
- Moisture seeped into the touchpad membrane
- Failed touchpad electronics
- Loose connection between the touchpad and the control board
- Heat damage to the touchpad from the oven vent
- Cleaning sprays seeping under the panel
How to fix Maytag F2-E0 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Clean the keypad gently
With power off at the breaker, wipe the touchpad with a soft cloth barely dampened with mild soap and water. Clean around each key edge where grease collects. Dry it completely before restoring power.Safety warning: Never spray cleaner directly onto the touchpad. Liquid seeping in causes the short. - Power reset and 60-second wait
Turn the breaker off, then on. Press Cancel and wait 60 seconds without touching anything. If the code does not return, a stuck key was the cause. - Press each key once
With power on, press every key once and feel for one that does not click or spring back like the others. A physically stuck key is sometimes obvious by touch. - Let a soaked panel dry
If the code appeared after cleaning the panel or a boil-over, leave the breaker off for several hours so trapped moisture can evaporate, then retry.Safety warning: Do not use a heat gun or hair dryer on the electronics.
When to call a technician
- The code returns after cleaning and the reset
- Keys feel melted, warped, or unresponsive
- The touchpad needs replacement (involves disassembly and wiring)
- The range is under warranty
Frequently asked questions
The oven beeps constantly with F2-E0. How do I stop it?
Turn off the breaker to silence it. Then clean the keypad and do the reset procedure before turning power back on.
Can I use the cooktop while F2-E0 shows?
Often yes — the fault is in the oven's touchpad, and many ranges keep the cooktop working. But get the panel fixed; a shorted key can worsen.
Do I need a whole new control panel?
If cleaning and resets do not clear it, yes. On many models the touchpad and control are one assembly that gets replaced together.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.