Maytag Oven F1-E0 error code
F1-E0 is an EEPROM communication error. The oven's electronic control cannot reliably read its own memory or talk to the touchpad, so it stops responding to commands.
Also shown as: F1-E0, F1 E0, F1E0
Last updated: October 6, 2026
What causes the F1-E0 error?
- Failed main electronic control board
- Power surge corrupting the board's memory
- Loose ribbon cable between the touchpad and the control
- Failing touchpad confusing the control's self-check
- Moisture damage inside the control housing
- Aging capacitors on the control board
How to fix Maytag F1-E0 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power reset for at least 30 seconds
Turn off the breaker for at least 30 seconds, then restore power. Wait a full minute before touching any key. This is the official first step and clears memory glitches.Safety warning: Wait the full minute after power returns before pressing keys — early key presses can re-trigger the code. - Check the touchpad connection (technician)
A technician can open the control housing and reseat the ribbon cable between the touchpad and the main board. A loose or corroded connection causes this exact error.Safety warning: Oven controls carry live voltage even when the display is dark. Keep the breaker off and call a technician. - Look for moisture
Steam from the oven vent or a boil-over can seep into the control area. If the code appeared after heavy steam or a spill, let the control area dry fully with power off. - Replace the control board
If the code returns after a proper reset, the board has failed. Replacement is the standard fix — some services also offer board-level repair.Safety warning: Board replacement on a 240V range is a technician job.
When to call a technician
- The code returns after the 30-second reset
- The oven is completely unresponsive
- You see moisture or corrosion inside the control area
- The range is under warranty
Frequently asked questions
The cooktop works but the oven shows F1-E0. Why?
The cooktop often runs on separate controls. F1-E0 is specific to the oven's electronic control and its memory, so the cooktop is unaffected.
Can a power outage cause F1-E0?
Yes. Surges and 'noisy' power during outages are the most common trigger for EEPROM errors.
Will a surge protector prevent this?
A whole-home or range-rated surge protector greatly reduces the risk of control board damage from power events.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.