Kenmore Oven F2 error code
The oven got too hot. The control detected an over-temperature condition and shut the oven down to prevent damage or fire.
Also shown as: F2
Last updated: October 6, 2026
What causes the F2 error?
- Shorted oven temperature sensor
- Stuck or welded bake/broil relay on the control board
- Poor sensor connection giving a false high reading
- Blocked oven vent trapping heat
How to fix Kenmore F2 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Stop the oven and let it cool
Press Clear/Off and leave the oven door closed so it cools down gradually. Flip the breaker off once it is cool. Do not use the oven again until the fault is fixed.Safety warning: An overheating oven is a fire risk. Keep the oven off and stay nearby until it cools. - Power-cycle after cooling
Once the oven is fully cool, turn the breaker back on. If F2 returns without the oven even heating, the sensor or control is at fault. - Check the oven vent
Make sure the oven vent, usually at the back of the cooktop, is not blocked by foil, pans, or debris. Blocked vents trap heat and can trigger over-temperature codes.
When to call a technician
- F2 returns when the oven is cold or after cooling
- The temperature sensor tests shorted (far below about 1100 ohms at room temp)
- A bake or broil relay is stuck on
- The control board needs replacement
Frequently asked questions
What does F2 mean on a Kenmore oven?
It means the oven overheated. The usual causes are a shorted temperature sensor or a stuck heating relay on the control board.
Is it safe to keep using the oven after F2?
No. An oven that overheats once can do it again. Get the sensor and control checked before baking.
Why does F2 appear when the oven is cold?
A shorted temperature sensor can report a false high temperature even when the oven is cold. That also needs repair.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.